Velaris - Acotar - Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removed the hanger hole at the top to convert it into a coaster. Reoriented the main base, the Mountains and the Stars
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
"This is a remix of [velaris acotar] by [Aartin Sanchez], originally licensed under CC0 (Public Domain). Modified by [Scott Pearce]." Please give credit to the original modeler if you use this, it was very helpful!
Velarus Acotar Coasters. Since they were made with PLA+ I would not use for your hot cup of coffee... If you want to do that, change filaments to ABS, ASA, or maybe PETG. I have had terrible luck with PETG.
This was printed with 0.2mm Layers using an H2D Bambu labs printer with AMS2 Pro. For some reason the default temp for the bed was set to 55° I have had adhesion issues, I set the bed temp to 60°. The bed is the textured PEI sheet that came with the printer. The bumpy surface makes the print look awesome. A KDEAVI bed might work just as well, they seem to have a similar surface look. I would not use a smooth bed.
I set the angle for infill at 22.5° and printed with 65% infill 5 top and bottom solid layers and three outer walls. No supports needed. Due to the multi colors printed on the same plane for each layer, z-hop is mandatory to avoid collisions. Reason for that angle change was so that the first solid layer above the infill was at a different angle than the infill.
Hopefully those settings are in the 3MF file, I am a NOOB to this...