Dumbbell to Kettlebell Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to fit the Powerblock adjustable dumbbell. Printed out of PET-GF15 for strength.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a dumbbell to kettlebell adapter for my 50lb Powerblock dumbbells but none exist that are long enough to fit on the handles and come out the top so I decided to crack open Fusion 360 and design my own. I made these out of PET-GF15 using a .6 nozzle and 4 walls. I recommend 15% Gyroid as your infill. I decided on PET-GF15 due to its strength and ease of print. Although PLA is very strong I don't recommend it because when PLA fails it's usually a catastrophic failure. PETG is a bit too "bendy" for this application IMO. So far I have tested it with the full 50 lbs and there has been no creeking or cracks with this material. Hope this helps some of you out there and let me know if you have any questions or improvement suggestions.