Haunted house, halloween 2026
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a mini haunted house, with different details. It is easy to print without much supports
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model of a haunted house; the house is enriched with various details, such as well-crafted windows, pumpkins and tombstones in the garden, and roof tiles. The front door is finely detailed, as are the steps leading up to the entrance.
My advice is to use PLA; you can even print it using a multi-filament setup if you like. I recommend a print bed temperature of 60°C and a nozzle temperature of 220°C, with a print speed of 150 mm/s. I also suggest enabling organic supports in your slicer. I used 10% infill, scaled the model up by 1600% in the slicer, and printed it in 6 hours on my Artillery printer.