1 / 1
Bare-Gears — zdjęcie 1

Bare-Gears

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is a gear playground for kids, and adults too.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Share Alike

Bare-Gear

Build, connect, and experiment with gears!

Bare-Gears is a hands-on mechanical toy that lets kids arrange different-sized gears on a board and discover how gears work. Mix and match small, medium, and large gears.

Components

  1. 1× Gear Board — Base plate with a grid of 4 mm mounting holes spaced 7.31 mm apart.

  2. 8× Small Gears — 14 teeth.

  3. 6× Medium Gears — 21 teeth.

  4. 4× Medium-Large Gears — 28 teeth.

  5. 4× Large Gears — 35 teeth.

  6. 2× Extra-Large Gears — 42 teeth.

  7. Mounting Pins — To support the gears and allow them to rotate freely.

Instructions

  1. Print the board and gears. PLA should work fine!

  2. Insert the mounting pins into the board's holes.

  3. Place the gears onto the pins. They should spin freely.

  4. Move the gears around to find positions where their teeth mesh properly.

  5. Turn one gear and watch the others rotate!

  6. Try different combinations of small, medium, and large gears to see how they affect rotation speed and direction.

Tip: If a gear feels tight, check the fit of the pin and add a washer underneath to reduce friction. Have fun experimenting! ⚙

Tagi