Beltstrom CMP-60 - Deep Rock Galactic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Belstrom CMP-60 from Deep Rock Galactic: Rogue Core! Everything was modeled by me.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
My take on the Beltstrom CMP-60 from Deep Rock Galactic: Rogue Core! The magazine is removable, so I'd recommend printing two. Some parts may require small amounts of superglue or a mallet to get them properly in place. Everything assembled just fine for me, but you may need to mess with the size for smaller parts in case they don't fit properly. Fitting the small red triangles are a particular annoyance. I also included a split version of both the magazine and the bulk in case your printer doesn't have enough space, since these pieces are rather long. Feel free to send me a message if you have any questions or problems! The gif below shows the proper assembly for the Beltstrom.
