Webcam Cover - Print in Place Sliding Privacy Shutter for Laptops and Monitors, 6 Pack (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thin print-in-place sliding webcam cover. Stick it on and slide it shut. Six on a plate, 16 minutes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slide it shut when you're not on a call. A thin sliding shutter that prints already inside its frame: stick the frame over a laptop or monitor camera with a strip of thin double-sided tape and slide to open or close. Six on a plate.
DETAILS
• 34 x 12 x 2 mm, 10 mm window. Check your laptop still closes with it on (2 mm is the usual limit).
• Prints in place with no supports: the shutter runs in V-shaped rails with 45-degree faces and a 0.3 mm gap. Flex it gently after printing to free it.
• Bambu Studio: 16 min, 3 g for six.
CUSTOMIZE (OpenSCAD)
Thickness, window size, gap and how many.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.