O.S. Bomba Costume Pack 2: Cat Pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Costume pack to add some "Meow Meow" to your O.S. Bomba! (Cat paw hands and Cat ears headband)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Dress up your O.S. Bomba marble launcher with this Cat 🐈 themed Costume pack!
Choose your colors, mix and match, make it YOUR O.S. Bomba!
Cat Gear Costume Pack:
You'll get modified hands in the form of Cat Paws. It can't really hold anything, but it'll look cute!
Also included are Cat Ears Headband to add some adorable cat ears to your O.S. Bomba.
Print Instructions:
there are two .3MF's included in case you are feeling lazy.
One .3mf for Bambu studio + p1p printer + PETG,
One .3mf for Snapmaker Orca + Snapmaker U1 printer + PETG
Else, you should probably use the STL files and manually configure the settings.
Enable supports/skirts/brims when necessary (each part will have files notes in the "Files" tab)
Do not use "Classic" wall generator, use "Arachne" instead. (Should be in the Quality tab)
Setting "Base pattern spacing" to 1.2mm(or smaller) will help with sag. (Support Tab>Advanced)
Don't use Tree supports, use "normal" supports
STL's should already be in optimal orientation
After adding the items to your plate (in your slicer), right click them to "split" it into multiple "parts". You will now be able to colorize the insides of the cat ear and the paw pad on the hands.
For those without a multi-color printer, you can delete the highlighted paw pad "parts" to make the paw pads visible, even without color swaps!
Assembly Instructions:
For a preassembled Bomba, remove existing hands before proceeding
Slide the cat paws on. (make sure the paw pads are facing the front.)
Flex the bands of the headband out slightly, then you can move it into position on the head. Press the rectangular pegs into rectangular holes to firmly attach the headband to the head.
Meow Meow!
ALT PARTS + STP Notes:
OnlyHeadband1: This is just the headband. No cat ears. Maybe you wanna turn it into something else? 😉
STP Parts are not oriented in optimal orientation for printing. STP Parts were Exported from Rhino3d and might have some errors. Hopefully it's easier to modify than STL files!