Midnight Spiral | Twisted Halloween Pumpkin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A purple spiral pumpkin with crescent eyes and a removable lid. Customise its exact design in Infillery.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Standard Digital File License
Spiralling ribs, crescent eyes and a surprised little mouth give this purple pumpkin its midnight character. Designed with Infillery’s Pumpkin Builder.
Make your own version: Open Midnight Spiral in the Pumpkin Builder to customise its shape, face, stalk and colours, starting from this exact design.
What’s included
midnight-spiral.3mf: one unsliced model with the body and lid/stalk assembly.
Printing and assembly instructions.
Nominal body width: 105 mm. Approximate assembled height: 98.8 mm.
Digital 3D-printable files. Optional battery LED tealight required separately.
Printing
Suggested starting settings: PLA, 0.4 mm nozzle, 0.20 mm layers, 3 perimeters and 10-15% infill. These are not physically tested settings.
Keep the supplied upright orientation. Body and lid/stalk assembly print separately. Keep lid and stalk together as colour parts of one object.
The sliced check uses supports disabled. Inspect the sliced layers before printing. The broad flat foot and 45° underside are designed to print without underside supports. Physical print verification is still pending.
Use a multi-material setup for the supplied colours, or print in a single filament.
Notes
The base uses the Curled under shape at 0% curl, limiting the underside to 45° while keeping a broad flat foot.
This exact version has passed automated closed-mesh checks but has not yet been physically printed or fit-tested. Images are model renders. Check thin features in your slicer at the supplied scale.
The removable lid has a bevelled seat with 0.35 mm nominal clearance. Allow the print to cool and check the fit gently.
The base has a 41 mm opening intended for a battery LED tealight approximately 35.8 mm wide. Light fit and illumination still need a physical check. LED only. Never use a candle or another heat source.
Licence and attribution
Original Infillery design, made with our procedural Pumpkin Builder with AI assistance in the design and software workflow. Standard Digital File License: personal, non-commercial use only. No file redistribution, remixing or distribution of printed copies.
Commercial use is not granted by this download. For a separately licensed commercial workflow, see Infillery’s current Maker terms or contact us.
More from Infillery
Customise Midnight Spiral in Infillery, or visit infillery.com for more creative tools. If you print this pumpkin, share a Make. We would love to see your filament choices.