Custom Shield Keychain Brisbane Broncos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-colour horse-head shield keychain with a clean, flat design. The yellow base frames a raised purple horse
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Item | Value |
|---|---|
Printer | Flashforge AD5X, 0.4 mm stainless nozzle |
Slicer | OrcaSlicer |
Profile | 0.16 mm Standard @FF AD5X |
Layer height | 0.16 mm (first layer 0.2 mm) |
Height | about 1.48 mm (9 layers) |
Supports | None |
Print time | 22 min (about 59 s preparation plus 21 min printing) |
Filament used | 5.26 g total (4.77 g in the model, 0.49 g in the prime tower) |
Filament cost | about $0.11 |
Colour changes | 5 |
Filaments
Colour | Use | Weight |
|---|---|---|
Yellow, Generic PLA | Shield base | 3.81 g |
Dark colour, Generic PLA | Horse and stripes | 1.46 g |
A two-colour horse-head shield keychain that prints flat in about 22 minutes with no supports. The yellow shield frames a raised dark horse and stripes, and there’s a hanging tab at the top for a split ring or clasp. It uses only about 5 g of filament, so it’s cheap and quick to batch-print as gifts.
You can customise your own colours for this great design. Pick any two filaments to match your favourite team, school, club or just your own style. Swapping the colours in your slicer takes a few seconds and the print settings stay the same.
Saved you some CAD time? Support the work with a Boost. 🚀 & Follow. Thanks
please post pictures