Single motor Dual drive gearbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printed single motor dual drive gearbox. By reversing the motor direction you can control two seperate…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 677
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a 3d printed single motor dual drive gearbox. By reversing the motor direction you can control two seperate gearbox drives.
you tube video can be found here. https://youtu.be/tfCw-bQ5ROA
Files are STL and 3mf type. The 3mf as they are faster to upload and down load and most all slicers work with them. But I do not know if thing-I-verse works with them so its a test.
There is a cap screwed over the swing idler gear. I placed a short compression spring in this cap to add light drag to the idler gear, this helps provide the swing action to the gear.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
any pla
any
Category: Mechanical Toys