Mini robot dual gearmotor drive base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mini version of my larger dual drive robot base, that you can find…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a mini version of my larger dual drive robot base, that you can find here. http://www.thingiverse.com/thing:3193733
The parts print with out supports. There is a main frame, 2 wheels, a battery latch and a support nub. I use two dc gearmotors that are common and low cost. You can get them in two gear ratios "fast and slow" and with 1 axle or dual axle. I buy the dual axle for most my projects and just cut off one axle side if it is not used. The frame has a place for a 2 cell or 3 cell battery holder and a switch. There is room for attaching electronics as well so it is self contained. You can build a body to slip over the assembled unit . I will add a you tube video of the two robots I built with there bodies to you tube. So check out my "Robothut" youtube channel. Sub and follow if you like 3d printing mechanical robot projects.
You tube video of assembly. https://youtu.be/hT6z3A25QzM
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
any any
any
Category: Robotics