claw connector 3/6mm for kites
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model for a claw connector used on kites for stand-offs or Sentinel kites
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model for a claw connector used on kites for stand-offs or Sentinel kites.
It connects 3 mm rods with 6 mm tubes.
Preferred print material is hard TPU or carbon fibre-enforced hard TPU (D60 or higher).
I have successfully used Extrudr TPU hard and Fiberlogy FiberFlex+CF.
Print on one of the flattened sides.
---
Dies ist ein Modell für einen Klauenverbinder für den Drachenbau - nützlich für Stand-offs oder Sentinel-Drachen.
Der Verbinder ist gedacht für 3mm Stäbe und 6mm Rohre.
Bevorzugtes Material ist hartes TPU oder Kohlefaser-verstärktes TPU (D60 oder höher), ich habe gute Erfahrungen mit Extrudr TPU hard und Fiberlogy FiberFlex+CF gemacht.
Bitte auf einer der abgeflachten Seiten liegend drucken.
