1 / 8
DNSYS Z1 AERO :X1-Z1 KNEE FRONT MOUNTER V1 — zdjęcie 1
1 / 8

DNSYS Z1 AERO :X1-Z1 KNEE FRONT MOUNTER V1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EXOSKELETON DNSYS Z1 AERO custom parts

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

kickstarterで届いたDNSYS Z1 AEROをDNSYS X1と合体させるのに便利な膝前ベースを設計しました。

必要な部品は

「X1-Z1 KNEE FRONT MOUNTER-L V1」×1個

「X1-Z1 KNEE FRONT MOUNTER-R V1」×1個

「X1-Z1 KNEE FRONT BASE-R V1」×2個

M3六角ナット×12個(片足なら6個)

M3-6以上の皿螺子×12本(片足なら6本)

両面テープ付マジックテープ(オス トゲトゲ)適量

です。

作業順序は下記のとおりです。

①印刷後はまず「X1-Z1 KNEE FRONT BASE-R V1」を写真にあるような形状にヒートガンで加熱して曲げてください。曲げ具合は好みがあると思うので任せますが、うまくいかない場合は連絡ください。治具を設計します

②「X1-Z1 KNEE FRONT MOUNTER-R V1」「X1-Z1 KNEE FRONT MOUNTER-L V1」の六角穴ににM3ナットを埋め込んでください。

③「X1-Z1 KNEE FRONT MOUNTER-R V1」「X1-Z1 KNEE FRONT MOUNTER-L V1」の赤丸部分に両面テープ付マジックテープ(オス トゲトゲ)を貼ってください。

④「X1-Z1 KNEE FRONT BASE-R V1」の黄色丸部分に両面テープ付マジックテープ(オス トゲトゲ)を貼ってください。

⑤「X1-Z1 KNEE FRONT BASE-R V1」の六ケ所のM3通し穴と「X1-Z1 KNEE FRONT MOUNTER-R V1」または「X1-Z1 KNEE FRONT MOUNTER-L V1」の六角ナットをセットした穴を合わせてM3ー6以上の皿螺子で締結してください。

⑥DNSYS Z1 AEROの該当箇所のネジを外して既存のパーツを引き抜き⑤で組み立てた部品に差し替えてから再締結してください。

⑦取り外した既存パーツのベルト、クッション類をセットすれば完成です。

I have designed a mounting base for the front of the knee that allows you to attach the DNSYS Z1 AERO (received via Kickstarter) to the DNSYS X1.

Required parts:

1x "X1-Z1 KNEE FRONT MOUNTER-L V1"

1x "X1-Z1 KNEE FRONT MOUNTER-R V1"

2x "X1-Z1 KNEE FRONT BASE-R V1"

12x M3 hex nuts (6 per leg)

12x M3 countersunk screws (6mm or longer) (6 per leg)

You will need an appropriate amount of hook-and-loop fastener (the "hook" or "spiky" side) with an adhesive backing.

Follow the assembly steps below:

① After printing, use a heat gun to heat and bend the "X1-Z1 KNEE FRONT BASE-R V1" part into the shape shown in the photo. You may adjust the degree of the bend to your preference; however, if you have trouble, please let me know, and I will design a jig for you.

② Insert M3 nuts into the hexagonal recesses on the "X1-Z1 KNEE FRONT MOUNTER-R V1" and "X1-Z1 KNEE FRONT MOUNTER-L V1" parts.

③ Apply the hook-and-loop fastener (the "hook" or "spiky" side) to the areas marked with red circles on the "X1-Z1 KNEE FRONT MOUNTER-R V1" and "X1-Z1 KNEE FRONT MOUNTER-L V1" parts.

④ Apply the hook-and-loop fastener (the "hook" or "spiky" side) to the area marked with a red circle on the "X1-Z1 KNEE FRONT BASE-R V1" part.

⑤ Align the six M3 through-holes on the "X1-Z1 KNEE FRONT BASE-R V1" with the holes containing the M3 nuts on the "X1-Z1 KNEE FRONT MOUNTER-R V1" (or "X1-Z1 KNEE FRONT MOUNTER-L V1"), and secure them using M3x6 (or longer) countersunk screws.

⑥ Remove the screws from the corresponding locations on the DNSYS Z1 AERO, take out the existing parts, replace them with the assembly created in step ⑤, and re-secure them with the screws.

⑦ Finally, attach the belts and cushions from the original parts you removed, and the assembly is complete.

Tagi