Zenless Zone Zero Eous Bangboo Coin Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eous, the lovable #01 of Phaethon's bangboo fleet, here to help you save up your real life dennies for a rainy day.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D printable piggy bank in the shape of Eous from Zenless Zone Zero. I'm a huge ZZZ fan and wanted to sculpt something representing the game, but I also like having prints serve a function. So I turned it into a piggy bank; that way my tribute can hold your tribute. ^_^
Created in Blender. Exported as OBJ files in order to retain material(color) information. Not sure if the .mtl files are going to upload properly to Printables, so if color information is missing, I apologize. The actual .3mf should have the appropriate coloring already done.
No AI was used in the generation of this model. Sorry, Fairy, nothing personal.
Supports required, I suggest Tree Supports. I drew them on manually to make sure the arms wouldn't fail before they joined the body higher up.
Sliced and Printed on the Snapmaker U1 in the following order to get 5 colors on a 4 color print:
-Load White, Black, Bright Green and Orange filaments.
-Print the tail (about an hour, uses Bright Green and Black).
-Print the head (about 6 hours, uses White, Black, Orange, and Bright Green) with a pause after the eyes have finished in order to swap the Bright Green over to Gray.
-Print the body (about 14 hours, uses White, Black, Orange, and Gray).
(I had a clog in the head printing the White filament during the print due to heat creep, so there are a few layers missing from his ear. Try to not print enclosed in a hot garage if you can avoid it. >_>)