Articulated Cute T-Rex (redesigned)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Articulated Cute T-Rex (redesigned) (Single or Multicolor) The head can rotate, and the arms can simply be clipped on
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
Some of you asked if I could make the head of my T-Rex rotate, so I decided to go back and redesign my original model!
The head can now rotate, and I also redesigned the arms so they can simply be clipped into place with a little pressure. I also added another articulated segment to the T-Rex’s tail for even more movement.
And of course, the jaw is still movable too — he definitely hasn’t lost his bite! 🦖
There will be no multipart version available for this redesign.
Old Model Link:
ℹ Tips for printing Multicolor:
Filament: PLA
Supports: No!
Layer height: looks best in 0.16(0.15)mm / 0,2mm also works
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: No!
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
Info‼: You can scale the T-Rex bigger but not any smaller otherwise the Connectors will no longer work!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (4 Color):
PLA Basic / BlueGrey
PLA Matte / LightGrey
PLA Matte / White
PLA Matte / Black
Or decide for yourself which colors and how many you want to use!
ℹ This model is very filament wasteful please keep that in mind!
------------------------------------------------------
ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!
(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)