Pumpkin Hearth — Halloween LED Lantern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheerful open-top pumpkin lantern for your Halloween table. Add a battery LED tealight for a soft glow.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
A small jack-o-lantern with ten gentle lobes, triangular eyes and a zigzag smile. Its open scalloped top makes the battery LED easy to reach, with no lid to lose.
How to use
Place on a stable shelf or table and insert a battery LED tealight up to 38 mm diameter and 30 mm high through the open top. Light is not included. Battery LEDs only: never use real candles, flame, hot bulbs, dry ice or liquids.
Included file
pumpkin_hearth.stl — supplied in millimeters.
Size: 90.73 × 86.98 × 60 mm.
Suggested printing
Print upright with the flat bottom on the bed. Suggested starting point: PLA, 0.20 mm layers, 3 walls, 10–15% infill, 4 bottom layers. No supports intended. Optional 3 mm brim. Check the lower outside slope and the short bridges around the smile in your sliced preview. Nominal radial side wall is about 2.8 mm and floor is 3.2 mm. Leave the top open; do not print in vase mode.
Preview and prototype status
The lifestyle picture is an AI-generated usage illustration, not a photograph of a printed part. Props are not included; appearance and scale may vary. The plain-background images are conventional renders of the supplied STL. Refer to those renders and the listed dimensions for the actual geometry. Original AI-assisted CAD; no third-party mesh was used. These are untested prototypes: digital mesh checks do not establish physical printability, durability or fit. Inspect, test print and adjust for your printer.
License
CC BY-NC 4.0: attribution required, noncommercial use only. Attribute İbrahim Özdoğan.
Support my designs — Buy Me a Coffee
If you enjoy this model, you can support more free designs with an optional coffee. Thank you!