Moonwing Bat — Halloween Hanging Garland
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print a few bats and thread them onto cord for a Halloween mantel, doorway or wall garland.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
A flat, broad-winged bat with pointed ears and shallow wing details. Two cord holes keep the silhouette facing forward when used as a lightweight garland.
How to use
Print as many copies as you need. Thread thin cord, ideally 1–2 mm, through the two 4.4 mm wing holes on each bat and space them along the cord. Secure the ends to suitable indoor hooks. Cord and hooks are not included. Hang out of reach of children and pets; this decoration is not a toy. Avoid hanging above a heat source.
Included file
moonwing_bat.stl — supplied in millimeters.
Size: 144 × 49 × 3 mm.
Suggested printing
Print flat, wing details upward. Suggested starting point: PLA, 0.20 mm layers, 3 walls, 15% infill. No supports needed. Thickness is 3 mm; grooves leave 2.5 mm beneath them. Keep 100% scale for the intended hole size. A single bat fits a 220 × 220 mm bed; arrange multiple copies with enough spacing in the slicer. Remove stringing gently around the holes.
Preview and prototype status
The lifestyle picture is an AI-generated usage illustration, not a photograph of a printed part. Props are not included; appearance and scale may vary. The plain-background images are conventional renders of the supplied STL. Refer to those renders and the listed dimensions for the actual geometry. Original AI-assisted CAD; no third-party mesh was used. These are untested prototypes: digital mesh checks do not establish physical printability, durability or fit. Inspect, test print and adjust for your printer.
License
CC BY-NC 4.0: attribution required, noncommercial use only. Attribute İbrahim Özdoğan.
Support my designs — Buy Me a Coffee
If you enjoy this model, you can support more free designs with an optional coffee. Thank you!