4 servo walking robot base controled by servo tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to make a Old school type robot with the glide slide walk action using 4 servos and a servo tester as the…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted to make a Old school type robot with the glide slide walk action using 4 servos and a servo tester as the manual and automatic controller. The servo testers are so cheep, under $2 bucks on ebay and the 9g servos are so cheep that it just seemed like a good idea.
So here are the STL files for the feet, ratchets, legs and body/battery box mount.You can see the base unit in action on You Tube. https://www.youtube.com/watch?v=FSefJ1_X-xs
Part 2 here. https://www.youtube.com/watch?v=6vNu6KSr4UI&feature=youtu.be
Or follow the Project on Alphadrome. http://danefield.com/alpha/forums/topic/18899-alpha-strider-a-new-3d-printed-robot-project/
Print Settings
Printer:
Flash Forge Dreamer
Rafts:
No
Supports:
No
Resolution:
middle setting
Infill:
15 %
Notes:
I run about 210 C on my PLA prints I used Design Spark to make the 3d parts and Mesh Mixer to mirror some of the parts.
Category: Robotics