Tri-Paddle Bar for the Logitech MX Mechanical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three big paddles that clip onto the front of the MX Mechanical and press Space and the keys beside it, for fist or palm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Three big paddles that sit in front of the Logitech MX Mechanical and press Space plus the keys beside it. For people with limited grip, tremor or low finger dexterity: use a fist, palm, knuckle or stick.
How to use: Centre paddle = space bar. Left/right paddles = the keys directly left and right of it (remap them to Enter, Backspace, etc. with PowerToys or Karabiner). Press near the back of the paddle, about 80-110 g. The paddle’s weight never triggers the key.
Non-destructive: The base clips on the front edge (lip on top, 2 mm tab underneath). Nothing is opened, drilled or glued.
Print: PETG, 0.2 mm, 4 walls, 25% infill, no supports. Base flat, paddles on their side (brim for the tall centre one).
Not printed: 3x 1.75 mm filament as hinge pins: 46, 108 and 50 mm.
Assembly:
Ream the 2.1 mm holes with a 2 mm drill if tight.
Put each paddle between the base’s ears, push the pin through, flare the ends.
Lift the keyboard front slightly, slide the tab under, lower it.
Checked virtually against Logitech’s CAD template; not test-printed yet.
Not an official Logitech product. Based on Logitech’s MX Keyboard CAD (model 1846004)