1 / 2
Seed Dispenser with Size Dial - Sow Seeds One at a Time, 5 Hole Sizes, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Seed Dispenser with Size Dial - Sow Seeds One at a Time, 5 Hole Sizes, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sow seeds evenly instead of in clumps: a cup, a cap and a click-on dial with five hole sizes and a closed position.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Stop sowing seeds in clumps. Fill the cup, press the cap on, then turn the dial to pick a hole size and tap seeds out one at a time along the drill. Turn it to the closed position to carry it about.

DETAILS

• Three parts: the cup (48 mm across), a cap with one window, and a dial with 1.5, 2.5, 3.5, 5 and 7 mm holes (dots on the dial show the size) that clicks into the cap's centre with a split snap peg.

• 1.5-2.5 mm suits carrot, lettuce and radish seed; 3.5-5 mm suits beetroot, spinach and chard; 7 mm suits peas and beans.

• Prints with no supports: the cup and cap print open-side up, the dial prints face-down, and the snap peg's head is a 45-degree cone.

• Bambu Studio: 54 min, 25 g for all three parts.

CUSTOMIZE (OpenSCAD)

Hole sizes, cup height and cap fit.

Tagi