Car Ice Scraper - Windscreen Ice Scraper with Ice Breaker Teeth, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A windscreen ice scraper with a 100 mm tapered blade, serrated ice-breaker sides and a grippy handle.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Be ready for frosty mornings: a windscreen ice scraper with a 100 mm blade that tapers to a thin scraping edge, serrated sides for breaking up thick ice first, and a grippy handle with a hole to hang it in the car or the garage. Keep one in the glovebox.
DETAILS
• 160 x 98 x 6 mm; the blade tapers to about 1.4 mm at the edge.
• Prints flat with no supports: the bottom is flat and the taper slopes down on top.
• Bambu Studio: 45 min, 22 g. PETG, ABS or ASA are best: PLA goes brittle in the cold.
• Scrape glass only, never paintwork, and check your car's handbook before using a scraper on heated or coated screens.
CUSTOMIZE (OpenSCAD)
Blade width, length, thickness and edge thickness.