Chicken Waterer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Chicken and Chick waterer for small setups
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printable waterer is designed for small chicken setups, chick brooders, backyard coops, and anyone raising a few chickens or chicks.
The design features mounting points for up to 3 chicken watering nipples, allowing multiple chickens or chicks to access fresh water from the same reservoir. Each mounting hole has a diameter of 10mm. One side has no mounting holes, allowing the waterer to be placed directly against a wall.
The lid is removable for easy filling. The waterer measures 12 12×18 cm and holds over 2 liters of water.
It's also ideal for hot weather, as ice cubes can easily be added to the reservoir to help keep the water cool during summer.
Note: Check the dimensions and compatibility of your chicken watering nipples before installation.
If you print this model, feel free to share your make and feedback!