Meteor65 Pro II O4 – Rugged FPV Case | 12× LiPo + VIFLY WhoopStor 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged case for Meteor65 Pro II O4 with 12 LiPo slots, VIFLY WhoopStor 3 charger and protective foam
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meteor65 Pro II O4 – Rugged FPV Case
🚁 Everything you need for your Tiny Whoop adventures!
I designed this rugged transport case to keep my BETAFPV Meteor65 Pro II O4, LiPo batteries, and charging equipment organized and protected in one compact package.
Instead of carrying the drone, batteries, and charger separately, everything now has its own dedicated place.
The case is based on the excellent Rugged Box (Parametric) by Whity, with a custom interior designed specifically for my FPV setup.
✨ Features
Dedicated drone compartment – A protective foam insert keeps the Meteor65 Pro II O4 securely in place during transport.
12 LiPo battery slots – Individual holders for BETAFPV LAVA II 1S 580mAh batteries, conveniently located inside the lid.
Integrated VIFLY WhoopStor 3 – A dedicated compartment for the six-channel 1S LiPo charger.
USB-C access – Convenient access to the charger's USB-C connection without removing it from the case.
Ventilation openings – Additional ventilation slots around the charger compartment.
Rugged construction – A sturdy 3D-printed enclosure with two mechanical latches and reinforced hinges.
Compact all-in-one design – Everything you need for your Tiny Whoop sessions in one portable case.
📦 What fits inside?
Drone compartment:
1× BETAFPV Meteor65 Pro II O4
Custom protective foam insert
Battery storage:
12× BETAFPV LAVA II 1S 580mAh LiPo batteries
Individual battery holders inside the lid
Charging station:
1× VIFLY WhoopStor 3 charger
Access to the USB-C charging port
Ventilation openings around the charging compartment
🔩 Hardware required
The case uses six M3 screws to assemble the hinges and latches.
Recommended hardware:
6× M3 screws, approximately 32mm long
6× M3 nuts for through-bolt assembly, as shown in the photos
Two screws are used for the rear hinges, and four screws are used for the front latches.
The Fusion 360 design uses a 3mm screw diameter and a nominal screw length of 32mm.
M3×35mm screws can also be used if shortened to the required length.
Stainless steel hardware is recommended.
🖨 Important – PrusaSlicer Setup
After importing the model into PrusaSlicer, make sure to split it into separate objects before printing.
Import the provided 3MF or STL file into PrusaSlicer.
Right-click the imported model.
Select Split → To Objects.
Arrange the individual parts on the print bed.
Check their orientation and print settings before slicing.
⚠ Important: Use Split to Objects, not Split to Parts, to ensure each component can be positioned and printed independently.
This step is necessary because multiple components are included in the same model file.
PETG is recommended for its durability and improved heat resistance compared to standard PLA.
A flexible TPU gasket can be used if included in your chosen print configuration.
The drone compartment shown in the photos uses a manually fitted protective foam insert.
Make sure the hinges and latches move freely after assembly.
⚠ Important LiPo safety information
This case is intended for transportation and organization. It is not a fireproof LiPo storage container.
Always supervise battery charging, keep the lid fully open during charging, and follow the battery and charger manufacturers' safety recommendations.
The ventilation and USB-C openings mean that the enclosure is not waterproof.
❤ Credits and original design
This project is a remix of Rugged Box (Parametric) by Whity (Printables model #258431).
The original Rugged Box is itself based on Tool box parametric by Yanev.
I modified the design to accommodate the Meteor65 Pro II O4, twelve LiPo batteries, and the VIFLY WhoopStor 3 charger.
Many thanks to Whity for creating and sharing such an excellent parametric design!