Snowflake Ornaments (Set 4)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snowflake Ornaments
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are some simple Snowflake Ornaments. This is a set of three. There are other snowflake sets, go to my account to check them out. They are 2.5mm thick, so nice and sturdy without being too bulky. They all have a hole at the top so you can easily pull a thread through.
Print Settings:
You can scale them to your desired size, but at 100% they all measure around 10 by 10 centimeters .
I usually print mine in PLA, but PETG works just fine.
A brim can be used so adhesion issues can be prevented. But considering the shape, a brim would be difficult to remove. Mine were printed without a brim and without issues.
The print time varies depending on size, but if you print them one at a time, they shouldn't take long. I printed all 3 together and they took about 1.5 hours.
The Snowflakes are numbered from 10-12, they are labeled in their files as well as in one of the cover pictures.
Have fun printing and feel free to post your makes! Merry Christmas!
Note: The original artwork is not mine. I only created the 3D printable file and tweaked the designs for better printing an aesthetic.