Luci - Disenchantment (multi-material)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is Luci from Disenchantment). He's a cute little cat like demon which inspired me to print him.
- Ocena
- 4,5 / 5
- Polubienia
- 127
- Pobrania
- 495
- Wydruki
- 8
- Wyświetlenia
- 2945
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Luci from Disenchantment). He's a cute little cat like demon which inspired me to print him. This is my first attempt at remixing something for multi-color prints either on the well known Prusa MMU2.0 or Mosaic Palette. You could probably do this print on a dual color printer too if you swap out the grey to white after the base is done.
For the file attached the colors are as follows:
F1 - Black
F2 - Grey/Marble
F3 - White
Happy printing!
Print instructions
Category: Creatures Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Supports: Yes
Resolution: .15
Infill: 20%
Filament: Various PLA Grey/Marble, Black, White
Notes:
I kept the supports to a minimum threshold so there wouldn't be as much too remove. It doesn't need a lot, just enough for the obvious spots.
Luci shown in the images above was printed at 75% scale on the Prusa MK3 MMU 2.0.