1 / 2
TV LED Strip 90° Corner Guide – Twist-to-Turn — zdjęcie 1
1 / 2

TV LED Strip 90° Corner Guide – Twist-to-Turn

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printed corner guide that twists an LED strip 90° onto its edge to turn a TV corner, then rotates it back flat

Ocena
5 / 5
Polubienia
4
Pobrania
34
Wydruki
1
Wyświetlenia
87
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

TV LED Strip 90° Corner Guide – Twist-to-Turn

A simple solution for routing LED strips around the corners of a television without forcing a sharp, flat 90° bend.

When installing LED bias lighting behind a TV, getting the LED strip around the corners can be frustrating. Flexible LED strips bend easily in one direction, but making a tight 90° turn while keeping the strip flat can put unnecessary stress on the strip and its electrical connections.

This 3D-printed corner guide solves that problem by changing the orientation of the LED strip as it travels around the corner.

How It Works

Instead of forcing the LED strip to make a sharp turn while lying flat:

  1. The LED strip approaches the corner lying flat against the back of the TV.

  2. The guide gradually rotates the strip 90° onto its edge.

  3. The strip travels around the corner in this rotated orientation.

  4. The guide rotates the strip back 90°, returning it to its original flat orientation.

  5. The LED strip continues along the next side of the television, now traveling in a direction 90° from where it started.

This allows a continuous LED strip to navigate a corner using a controlled three-dimensional twist rather than a sharp bend across its width.

Features

  • Designed for LED backlighting behind televisions and monitors.

  • Guides an LED strip through a 90° change in direction.

  • Rotates the strip onto its edge and back flat.

  • Helps reduce sharp bending and stress at the corner.

  • Useful for DIY ambient lighting and bias-lighting projects.

  • Compact, functional 3D-printed design.

Great For

  • TV ambient backlighting

  • DIY Ambilight-style setups

  • HyperHDR and Hyperion projects

  • WLED-controlled LED lighting

  • Addressable RGB LED strips

  • Custom monitor and display lighting

Installation

Position the guide at the corner of the TV, following the intended LED strip path. Route the strip through the guide so it gradually rotates onto its edge, turns the corner, and returns to a flat orientation.

Ensure the LED strip can move through the guide without excessive pressure or sharp creasing. Secure the guide and strip using a mounting method appropriate for your installation.

Compatibility

Check the dimensions of your LED strip against the model before printing. LED strip widths, thicknesses, coatings, and bending capabilities vary by manufacturer.

Printing

PETG is a good material choice for installations behind televisions because of its better temperature resistance compared with PLA.

Suggested starting settings:

  • Layer height: 0.20 mm

  • Nozzle: 0.4 mm

  • Perimeters: 3

  • Infill: 15–20%

  • Material: PETG or PLA

Select print orientation and supports based on the actual model geometry.

Feedback

If you print this model, I'd love to see how you use it! Share a make, leave feedback, or suggest improvements for future versions.

Tagi