Pen Spinner Rings – Copter, Windmill, Cat & UFO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fidget ring that spins a pen or pencil on your finger. 4 themes + Classic, rings Ø14–21 mm, clips for 7–11 mm pens.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Clip in a pen. Flick it. Watch it spin!
Print a ring in your size and a clip for your pen, click them together, snap in a pen and flick it. A split snap pin clicks into the clip, and the clip turns freely on the ring's collar. The pen becomes the Copter's rotor, the Windmill's sails, the Cat's propeller cap or the UFO's beacon. A plain Classic ring is included too.
Files
Pen_Spinner_<Theme>.3mf – one plate per ring size (14–21 mm) with the 8 mm clip, plus a plate with all four clip sizes. Bambu Studio, OrcaSlicer and PrusaSlicer.
STL/<Theme>/<Theme>_ring_<size>mm_<part>.stl – one STL per colour per size. In PrusaSlicer/Orca load the parts of one ring together and say Yes to "multi-part object", then give each part its filament.
STL/Pen_clips/<Theme>_pen_clip_<size>mm.stl
README.txt
Sizes
Ring (inner Ø) | US size | Rough guide |
|---|---|---|
14 mm | 3 | younger kids |
15 mm | 4¼ | kids |
16 mm | 5½ | kids |
17 mm | 6½ | older kids / small adult |
18 mm | 7¾ | teens / adult S |
19 mm | 9 | adult M |
20 mm | 10¼ | adult L |
21 mm | 11½ | adult XL |
Pen clips: 7 mm (slim pens, round pencils), 8 mm (standard ballpoint, hex pencil), 9.5 mm (gel pens), 11 mm (thick markers).
Print settings
Setting | Value |
|---|---|
Material | PLA |
Layer height | 0.2 mm |
Walls / infill | 3 walls, 20% gyroid |
Supports | None (Copter and Windmill: tree supports recommended) |
Brim | 5 mm outer brim on the ring |
Orientation | As supplied: ring upright, clip on its base |
Tested on a Bambu Lab X2D. Fits any printer.
Assembly
Push the clip straight down onto the ring's pin until it clicks.
Snap a pen into the clip and slide it to balance.
Flick and spin. Pull firmly to take the clip off.
Original design by A Arte De. Please share a Make!
NEW - Bambu Lab H3C: Pen_Spinner_UFO_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.