Bionicle Mask - Kanohi Miru Concept
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Bionicle compatible mask inspired by G2 concept art.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone!
This is a Bionicle mask inspired by this piece of concept art from a promotional image for G2. I really like the look of this art, and on a couple occasions I've tried to make a model of it, but none of them looked correct to me. I decided to take another crack at it recently, and this time I was able to complete a mask that I'm pretty happy with! It's not a perfect recreation of the sketch, but I did my best to take details from the sketch and combine them with details from the original Miru and make something new.
Part Information
Both stud and axle connection versions of mask have been uploaded, and the mask should fit Mata and Metru style heads. I recommend the stud connection for use with Mata heads, but either version should work with Metru heads.
Printing Information
Due to the size and level of detail, I recommend printing this part at a more fine resolution than you might normally print at. I toleranced the stud and axle connection fittings around printing this part at 0.12mm layer height on an FDM printer, so I recommend that print resolution. This part will require support material, and I recommend the print orientation below for the best bed adhesion and surface results. Tree style supports are recommended.
Sendoff
I had a ton of fun working on this project, and I hope everyone else enjoys it as much as I have!