LayersFactory
Zgłoś model
1 / 2
BERK TRAP DOOR CHARACTER [MULTI-COLOUR] — zdjęcie 1
1 / 2

BERK TRAP DOOR CHARACTER [MULTI-COLOUR]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ONEOFONE

ONEOFONE

@ONEOFONE_4909718

Bring a classic slice of 80s stop-motion with Berk, the lovable, oval-shaped blue servant to "The Thing Upstairs"

Ocena
5 / 5
Polubienia
4
Pobrania
10
Wydruki
1
Wyświetlenia
42
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Characters & Monsters
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (3)Powiązane

⚙ "Feed me! Berk, feed me!"

Bring a classic slice of 80s stop-motion nostalgia to your desk or workshop! This is Berk, the lovable, oval-shaped blue servant to "The Thing Upstairs" from the iconic British series The Trap Door.

Whether you're dodging rogue Trap Door creatures or just keeping your workspace entertained, this detailed print is designed for clean results, minimal support waste, and maximum character.

⚙ Assembly & Printing Notes

For the sharpest details and cleanest support removal, slice using the following parameters:

  • Nozzle Profile: 0.4 mm standard

  • Wall Generator: Arachne (Required for fine feature definition)

  • Wall Loops: 2

  • Infill: 15% (Gyroid or Grid recommended)

  • Supports: Enabled

    • Support Placement: Set to Bed Only / On Build Plate Only

  • Colour Setup: Can be printed in 1 or 2 colours
    (looks iconic in classic bone/white or printed in a single colour for manual painting).

  • Easy Support Removal: Using "Bed Only" supports keeps the bottom stand clean while giving key overhangs all the support they need.

  • Adhesion: Please ensure your bed is clean and well-levelled for the perfect first-layer finish.

⚙ How to Customize Colours

  1. Open the project in You're Slicer

  2. In the left panel, switch from the Global tab to the Objects tab.

  3. Expand the coaster assembly to view individual parts.

  4. Select individual objects/parts and assign your desired filament colour slot
    (or right-click → Change Filament).

⚙ Note

  • Adhesion: Please ensure your bed is clean and well-levelled for the perfect first-layer finish.

  • If you enjoy this print, please consider sharing a photo and leaving a comment and like! 

  • I cant wait to see how yours turns out!