1 / 2
BetaFPV Pavo Pico II Battery Armor — zdjęcie 1
1 / 2

BetaFPV Pavo Pico II Battery Armor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery impact protection for the BetaFPV Pavo Pico II Whoop.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Since the battery of the drone is mounted below the frame, any landing and most crashes hitting the battery. So i designed a protection for the BetaFPV Pavo Pico II. A nice side effect is a more stable liftoff position. The Protection is meant for the original betafpv LAVA II 2S batteries

My reallive experience with some prototypes of the BattArmor are good. It doesnt take any damage on landings and the drone stands good for takeoff. The most crashes didnt take out the BattArmor. But if things get hefty the breakout zones are doing their job what could protect your battery

Print settings:

-Layer height 0,2mm

-auto supports on 

-works with PLA and PETG

Place two or more models on the print bed. This helps keeping the heat exposure of the front lip low. Also, spares are a good thing. Please be careful while mounting the armor.

Tagi