1 / 3

A Pair Of Clicky Fidgets!!!

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are a pair of 2 fidgets, one is a spring gear clicky fidget and the other is a CC2 themed button spring clicky one

Aktualizacja u źródła: 17 paź 2026

Informacje o modelu

As the title says... these are a pair of clicky fidgets... this is also my first time designing these type of springs.

ps: along with an elegoo centauri carbon based clicky fidget!!!

So yea the above are the fidgets!!!

(Yea these need a little assembly)

Fidget 1 (Gear Spring fidget)->

First print the body for it along with its rod and the 30 tooth spur gear,
Then take the rod and push it into the spur gear make sure that the spur gear is able to spin considerably freely.
Then take the rod along with the gear and then insert the rod into the body at an angle through the two openings at the front and the back so that it fits then once inside get it to be as horizontal as possible with the top of the gear slightly sticking out of the opening at the top and glue the two ends together while making sure not to glue to gear to the rod itself!! (refernce image bellow->)

Now just slide in the spring through the same two openings at the front and the back and then simply glue ts bottom to the bottom of the body making sure that its top is in the middle of two of the spur gear's teeth as in the reference image below-- >

THAT'S IT U HAVE MADE THE FIRST FIDGET!!!! HAVE FUN CLICKING :D

FIDGET 2 (The CC2 themed fidget)->

First you will need to print out all the parts for the 2nd fidget.
Then u will need to remove all the supports for it (sorry but for this u might need a bunch of supports)
Next what u will need to so is u will need to put the spring into the body form the opening at the front and glue it to the base of the body all u need to make sure of is that the one part of the spring that is not curved and rather has a somewhat pointy edge needs to go in between the two triangular extrusions on the side of the body, make sure that both the pointy end of the spring and the triangular part only overlaps 0.5 to 0.7mm for a perfect click!!
Next what u need to do is take the button part of this fidget that has the words Elegoo, HackClub and Atlantis extruded on top of it and apply glue to its bottom side, now carefully pass that through the opening on the top of the body and it should now meet with the top of the spring that u have placed inside gluing both its base and the spring's top together!!!
After letting the glue dry u should now be able to press the button on top and u will get a nice satisfying click sound!!!

THATS IT U HAVE NOW BUILT THE SECOND FIDGET TOO!!! HAVE FUN :D

So.... i am a 16 yr old teenager and i love 3d modelling, designing custom electronics, PCB's, and making the occasional non vibe coded website!!!

some of my other projects --->