Superdad - Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Show some love for your superhero.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
SUPERDAD
Show some love for your superhero.
Design Highlights
Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear
Low Material Cost: The keychain uses approximately 3g of filament.
AMS: The keychain is designed to be printed using an AMS
NO AMS: You can also print this without an AMS by adding a pause in your slicer at Layer 11. When the printer pauses, simply swap your filament and resume!
Recommended Print Settings
Nozzle: 0.4mm (Standard) or 0.2mm (for ultra-sharp text).
Layer Height: 0.16 mm or 0.20 mm.
Wall Loops: 4 (Recommended for loop strength).