CC1 Canvas Hub Quick Connect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print to disconnect and reconnect quickly the 4 way hub of the Centauri Carbon Canvas
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
The print consist in 2 pieces, the bracket and the plate, the bracket replaces the original one that comes in the canvas kit, while the plate goes right against the back of the hub and needs to be screwed. Be advised that you cannot use the 2 stock screws of the but need 2 M3X8 with a screw head of 5mm, I include the photos to the one's i use.
Regarding materials and settings: Do not use PLA or PETG, use a better material like ABS, ASA, PETG-CF or among the likes, I personally used PC-ABS. To ensure the most precision print at 0.1mm layer height, part are already oriented (i know that the dovetails are weaker because of the print orientation but after 100hr of print time they never broke + if it's printed in vertical then you weaken the whole bracket which i dont know how good of an idea it is)
I also upload the step file if anyone wants to make improvements or adjustments.