1 / 2
Seed Dibber Board - Makes 24 Evenly Spaced Sowing Holes at Once, Customisable Spacing, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Seed Dibber Board - Makes 24 Evenly Spaced Sowing Holes at Once, Customisable Spacing, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Press it into a seed tray or raised bed to make a whole grid of evenly spaced sowing holes at once.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Sow a whole tray in seconds. Press the board into a seed tray, a module tray or a raised bed and it makes a grid of evenly spaced sowing holes at once: 24 holes 25 mm apart and 15 mm deep by default. Drop a seed in each hole and cover. Finger holes at each end to press it down and lift it out.

DETAILS

• 206 x 100 mm board with cone pegs; the spacing is engraved on the end.

• Prints flat with no supports: the pegs point up from the board.

• Bambu Studio: 1 h 59, 62 g.

CUSTOMIZE (OpenSCAD)

Spacing, columns and rows, hole depth and peg size (match your module tray).

Tagi