Ender 3 Ender 3 90 Degree Bed Cable Mount for Solid Bed Mountss
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the cable strain that Chris Riley made for his Lack Enclosure V2 build. This type of mount directs the bed…
- Ocena
- 4,4 / 5
- Polubienia
- 23
- Pobrania
- 163
- Wydruki
- 3
- Wyświetlenia
- 1406
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I modified the cable strain that Chris Riley made for his Lack Enclosure V2 build. This type of mount directs the bed cables straight down in order to allow clearance at the back of the bed for use in an enclosure such as the Lack enclosures.
My modifications make it easier to print without supports and modifies the mounting point to work with solid bed mounts such as these. I included a cover that I'm not the happiest with, but it works well enough if I put a zip tie right behind it to hold it in place. I wanted something in place just to protect the top of the cables from the hot end.
I suggest printing in PETG or ABS due to the heat it is likely to encounter being right next to the bed.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
50
Filament: MatterHackers ABS
Category: 3D Printer Parts