1 / 2
Ender 3 Direct Drive Spacer for EZR Struder and Phaetus Dragonfly BMS — zdjęcie 1
1 / 2

Ender 3 Direct Drive Spacer for EZR Struder and Phaetus Dragonfly BMS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This needs to be used with the spacer for the Phaetus Dragonfly BMS hotend This spaces out the EZR Struder to be used…

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
361
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This needs to be used with the spacer for the Phaetus Dragonfly BMS hotend

This spaces out the EZR Struder to be used with many common cheap direct drive upgrade kits for the Ender 3. With this spacer, it allows the EZR Struder to be mounted and aligned with the Phaetus Dragonfly BMS hotend when the hotend is mounted with this spacer in a direct drive setup.

I used the PrinterMods part for this kit as a starting point and remixed it to be a little larger to work with the kit that I have.

The kit I tested this with is this one.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

100

Filament: MatterHackers ABS

Category: 3D Printer Parts

Tagi