1 / 6
Customizable Gear Ratio 1:2:3 Hand-Crank Souvenir v3 - Horizontal Desk-Row (12T+24T+36T) — zdjęcie 1
1 / 6

Customizable Gear Ratio 1:2:3 Hand-Crank Souvenir v3 - Horizontal Desk-Row (12T+24T+36T)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parametric 1:2:3 gear-train souvenir (12T+24T+36T) that spins: printed gears on shafts, crank drive. Drag the sliders!

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

CUSTOMIZABLE PARAMETRIC MODEL - edit numbers, drag sliders, rebuild. This is a TrueGeometry Playground recipe model: every dimension comes from the variables at the top of the script (gear module, tooth counts, thickness, axle size, clearances, crank offset). No CAD skills needed.

WHAT IT IS

A working gear-ratio 1:2:3 hand-crank souvenir (12T+24T+36T), horizontal desk-row layout. Printed gears spin on printed axles in a support frame with real shaft holes; the red crank is pinned through gear A and turns the whole train. Great desk toy and a hands-on demo of gear ratios: count turns of the crank vs. the output gear.

Customize it in 2 minutes:

  1. Open TrueGeometry Playground (free, browser-based): https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html

  2. Click the Script button, paste the recipe (attached .txt or the blog article 

below), press Run.

  1. Open the Variables panel, tick Auto-Run, then drag the sliders - tooth counts, module, thickness, axle size - and watch it rebuild live. (Ctrl+Enter also re-runs the script; lists, if any, are edited as text.)

HONEST NOTES

  • Untested design study: geometry is checked on screen (no floating or clashing parts in the default build) but I have not printed this exact set yet. Please post a Make if you print it - it helps the community.

  • STLs are native Playground exports; the mesh is functional but not a single watertight manifold (parts are separate shells by design - no boolean unions), and a few facets can have zero normals. Slicers handle them fine; run a mesh repair if your slicer complains.

  • Clearances baked in: support holes are axle +0.1 mm radius, spacer bores +0.3 mm, crank hole +0.1 mm. If your printer 

over-extrudes, drill the holes out slightly.

  • Change tooth counts a lot and you may need to adjust the plate/base variables too - the article explains the sizing rules.

FILES

  • *_Assembly.stl - the full assembled model (reference / single-piece display print)

  • Component STLs - print these for the working mechanism: gears, axles, spacers, caps, base, crank pin, crank knob

  • *_recipe.txt - the full variable-first Playground script

  • *_Playground_Guide.pdf - step-by-step: run the script, customize with sliders, export your own STLs

PRINTING

0.2 mm layers, 3 walls, 15-20% infill, PLA. No supports needed for the flat-packed parts. One spacer and one cap per axle - see the assembly guide in the article.

Full build article with the complete recipe, sizing tables and assembly photos:

https://blog.truegeometry.com/0_0_0_0/blogs/post-beb6b6be.html

Run/customize in TrueGeometry Playground: https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html

License: CC BY 4.0 - remix and share with attribution. AI-assisted design (TrueGeometry Playground).