1 / 2
Over-Door Wreath Hanger with Star - No Nails, Fits Your Door Thickness, Prints Flat, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Over-Door Wreath Hanger with Star - No Nails, Fits Your Door Thickness, Prints Flat, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hang a Christmas wreath on the front door with no nails: a thin strap over the top, a deep hook and a star.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hang a Christmas wreath on the front door without nails or screws. The thin top strap sits over the top of the door (it still closes), a short leg with a grip bump holds the inside, and the front drops to a deep hook with a star on it. Set your door's thickness in the Customizer.

DETAILS

• For doors 44 mm thick by default (UK internal doors are about 35 mm); 150 mm drop to the hook; 18 mm wide.

• Prints flat on its side with no supports: it's one profile.

• Bambu Studio: 34 min, 16 g. PETG copes best outdoors.

CUSTOMIZE (OpenSCAD)

Door thickness, drop to the hook and width.

Tagi