Working modern detaching ski lift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modern detaching 6:1 slowing ski lift station with a gondola, rope support poles and optional dc motor at the bottom
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
This is a wohle working ski station, I made this because
1.: Im a ski fan
2.: Many pepole dont realise how compicated ski lifts really are behind the scenes. With this model, more popole can understand, how these machines work.
3.: This is gonna look sick with all the gears
What do you need:
A 3D printer with a workspace of 256*256*256mm (it can be smaller but then you have to slive the wohle model into pieces
Many filament and glue
A very small rubber band
Optional: DC motor with a D-shaft like this:
How to assemble:
Gondola:
Glue the gondola_bottom.step to the gondola_top.step like this:
Put the gondola_guide.step into ther gondola here, like this:
Glue the gondola_grabber_1.step to the base but leave the gondola_guide loose, so it can move a little bit:
Put the gondola_grabber_3.step onto the gondola_grabber_1.step (dont use glue!) and rotate its arm down like as it opens normally.
Glue the gondola_grabber_4.step to the base with the distance from the gondola_grabber_3.step's arm depending on the rubber band's sternght (more distance->stronger grip onto the rope) and put the rubber band ontp the hooks. Example:
And finally glue the gondola_grabber_2.step to the gondola_grabber_1.step and the base (gondola_top.step) like this:
Support pole:
Glue support1, 2, 3.step together to make a shape like this:
Print and glue these again and glue the 2 identical objects together to form a new object what looks like this:
Station:
Glue bottom1, 2, 3. ... .step together to get this object:
Glue top1, 2, 3, 4,... .step together, here is an image with the position of the topnumber(1:18) files:
Glue the big_gear1, 2, 3.step together and glue the base1, 2, 3, 4,.... .step together AROUND the big_gear.step, otherwise it will not fit in! Positions of the base:number(1:15).step files around the gear:
To place the gears, some gears on the pic. gonna have the same number because they have the same size, print the amount of x gear of the amount x is on the picture:
Now glue the caps onto the gear supports, over the gears to secure them but leave the gears free (only glue it to the base). From gear number 4 to gear number 13 small gears like gear4.step have cover1, big gears like gear5.step have cover2.step on top (gear 2 and 3's outer sides also have cover2.step on top. gear2.step and 3's inner side have cover3 and gear1's both support have cover4.step on top.
Glue the base_outer pieces together, positions are on the pictures:
Print like 12 of connector.step and glue them to the base and base_outer like on the picture but leave the same space between the same at every point of the gap!:
Glue the bottom and the base together as it in the picture, repear the station building, insert the rope, connect the ends of the rope, put the support between the 2 stations and print as many gondolas as you want and put them on the rope, just put the top on the top and start understanding ski lifts!