Bear Hug Curtain Tieback – One-Piece, Dovetail or Glue-in Colors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A teddy bear that hugs your curtain. Screw-on wall tieback in 3 versions: one piece, 4-part dovetail or glue-in colors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bear that hugs your curtain
A fluffy teddy bear reaches out of a small wall plate with both arms. Pull the curtain aside, tuck it behind his arms, and he holds it open. Made for nurseries and kids' rooms, or anywhere a plain hook is too boring.
The first image (bear on the curtain) is an AI-generated mockup based on this model. The other images are renders of the actual files. Real print photos are coming soon. Please share your make!
Three versions, same bear
Pick the version that fits your printer and your patience. File names start with v1_ / v2_ / v3_. Parts shared by V2 and V3 start with v2_v3_.
V1: One piece
Plate and bear in a single print.
v1_one_piece_single_color.stl: one colorv1_one_piece_3colors_painted.3mf: 3 colors, painted on the surface (multi-material painting in PrusaSlicer / Orca / Bambu Studio)v1_one_piece_3colors_separate_objects.3mf: 3 color bodies (brown / cream / black) that sit together, one filament per objectv1_color_brown / cream / black.stl: the same color bodies as separate STLs⚠ Needs a lot of supports (arms and head).
V2: Four parts with dovetail joints
Plate, body, upper arm and lower arm. Each part is already oriented for printing. Dovetail joints, no glue needed in the rails.
v2_v3_plate.stl,v2_body_single_color.stl,v2_v3_arm_upper.stl,v2_v3_arm_lower.stlv2_4parts_3colors_painted.3mf: 4 parts, body painted in 3 colorsv2_4parts_3colors_separate_objects.3mf: 4 parts, body split into 3 color bodiesv2_body_color_brown / cream / black.stl: body colors as separate STLs
Assembly: screw the plate to the wall, slide the body onto the plate from the side, then add the lower arm, then the upper arm.
V3: Glue-in colors (no multi-material printer needed)
Same 4 parts as V2, but the face colors are small separate pieces.
v3_body_with_pockets_brown.stl: brown body with pockets for the muzzle, nose, eyes and earsv3_insert_*.stl: small cream and black inserts. Print each in its color and glue it into its pocket (0.12 mm clearance).v2_v3_plate.stl,v2_v3_arm_upper.stl,v2_v3_arm_lower.stl: same as V2v3_glue_set_all_pieces.3mf: all pieces laid out on one plateThe smile is engraved in the muzzle. Fill it with a fine marker or paint.
Size
Overall: about 89 mm wide × 111 mm tall, sticks out about 85 mm from the wall
Wall plate: 64 × 76 × 5 mm
Gap between the paws and the wall: about 33 mm
Mounting / hardware
2 × countersunk screws, Ø3.5 mm, for heads up to Ø7.5 mm (90° countersink), holes 50 mm apart
Wall plugs to suit your wall
V3 only: a little glue (CA / super glue) for the inserts
Print settings (suggested)
Material: PLA
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 15%, 3 walls
Supports: V1 needs supports under the arms and head (tree/organic recommended). V2 / V3 parts are pre-oriented.
Print tips
V2 / V3 parts are pre-oriented; just load and slice.
The 3MF plates are about 220 × 65 mm (V2) and 180 × 105 mm (V3). Rearrange the parts for smaller beds.
About the design
The bear sculpt was made with an AI 3D generator. The wall plate, dovetail joints, 3-color split, glue-in pockets and inserts were designed by me.
