3D Stereoscope Simple version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simplified version of my 3d Stereoscope.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This is my simple version stereoscope. It has the advantage of being a quick and easy print, but the disadvantage of not being able to adjust the view angles. (See my Deluxe version if you need this)
This build requires four 1 inch mirrors (25mm) to be glued into the frame. There are small insets to ensure proper alignment.
Since the view angles are fixed, I have provided 3 versions of this file to help, depending on what size images you want to view.
The "Neutral" version is the best all around, and the one you should try first. It works on images on my iPad and computer monitor images that are not full screen.
The "Small" minus 2 degree version is best for viewing smaller images, such as on a phone screen.
the "Wide" plus 2 degrees version works well for larger images on my monitor.
There are slots along the sides to place a strap for extended use.