Cat Scratcher Frame - Refill with Cardboard Strips from Old Boxes, Sloped, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sloped frame you fill with strips cut from old cardboard boxes for a free, refillable cat scratcher.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fill it with strips cut from old delivery boxes and you have a cat scratcher for free; when it wears out, pull the strips out and refill it. The frame slopes from 50 mm at one end to 30 mm at the other so cats can scratch on an incline, and the base has hex holes so it grips and lets the crumbs out.
DETAILS
• 200 x 120 mm outside, 194 x 114 mm inside, 50 to 30 mm tall.
• Cut corrugated cardboard into 50 mm strips and pack them in on edge, tightly, until they hold each other.
• Prints flat with no supports.
• Bambu Studio: 2 h 59, 108 g.
CUSTOMIZE (OpenSCAD)
Inside length and width and the height at each end.