Stocking Hooks - Clamp-On Christmas Stocking Holders for Mantel or Shelf, No Screws, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp-on hooks that hang Christmas stockings from a mantelpiece or shelf edge with no screws or weighted holders. Set yo
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hang Christmas stockings from the mantelpiece or a shelf without screws, nails or heavy weighted holders. Each hook clamps onto the front edge of the shelf, gripping the top and the underside, and the J hook ends in a star. Set your shelf thickness in the Customizer and they grip 0.5 mm tight. Four in a set.
DETAILS
• For a 30 mm shelf as set (12 to 60 mm in the Customizer), 60 mm reach over the top, 20 mm wide.
• Prints flat on its side with no supports. PETG is a little springier if you take them on and off every year.
• Bambu Studio: 1 h 46, 56 g for all 4.
CUSTOMIZE (OpenSCAD)
Shelf thickness, reach, hook width and how many.