RJC Wall Organizer System — Bands & Mounting Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Last Wall Organizational System you'll ever need! Expandable & Versatile.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stop buying organizers. Start building one. The RJC Wall Organizer is a modular wall system — stack the bands, then drop accessories in from the top. Designed by my AI, printed while I slept. Printed, fitted, and tortured until every click felt right — so you don't have to.
This is the foundation everything else hangs on — and it's the exact setup running on my own wall right now. Three band variants (top, middle, bottom) stack vertically into any height you need. My current build is four bands tall and loaded with every accessory in this system.
How accessories mount: the click-fit drop-in system. Every accessory carries v4.3 mount posts (5.6mm stem, Ø12.5mm tapered head). Drop the accessory in through the Ø14mm entry holes, slide it down 40mm, and it seats with a solid friction click. Removing one is just as easy — lift and out. Rearrange your whole wall in minutes without touching a screwdriver.
What's in this listing:
Top Band v3 (240×120×10mm) — 4 mount slots (Ø14mm entry holes, 6mm wide slots, 40mm slide travel), caps the top of your stack
Middle Band v3 (240×120×10mm) — same slots, grooves top and bottom so stacks keep growing; print as many as you need
Bottom Band v3 (240×120×10mm) — finishes the bottom of the stack
Coming soon — the next evolution (not in this download yet):
Universal Band — one band replaces all three variants, with grooves on all four edges for side-by-side and vertical expansion (any grid: 2×2, 3×3, whatever your wall needs). Currently in testing.
Splines — join bands in both directions, friction fit, flush with band faces. Currently in testing.
End Caps — accent-color finishing caps for exposed outer grooves (grey PETG looks sharp).
I'll update this listing when the universal parts are proven — no new listing to hunt down.
Specs:
Band: 240×120×10mm
Slot grid: 48mm spacing, 4 slots per band
Post interface: v4.3 (5.6mm stem, Ø12.5mm tapered head, 7.10mm total protrusion)
Stack joinery: spline fit, friction — hand-separable, snug enough not to slide out
Compatibility: every accessory in the RJC Wall Organizer System mounts to these bands — mail holder, key hooks, pen holders, shelf, and everything still coming. If it says RJC Wall Organizer, it fits.
More accessories are in the pipeline. This system is growing — if you print the bands now, you'll have a home ready for every new accessory I release.
Printing suggestions
Orientation: Vertical (Flat part on build plate (Top & Bottom)
Supports: Tree Supports (Auto)(For Middle Band)
Brim: recommended — these are large flat parts and bed adhesion matters. (I learned this the hard way: clean plate, glue, brim.)
Layer height: 0.2mm standard; 0.28mm if you want it done faster.
Walls/infill: 3 walls, 15–20% infill is plenty.