RJC Wall Organizer System — Pen Holders (Left + Right) & Centered Posts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three tubes, zero clutter. Open-top pen holders for the RJC Wall Organizer System-pens, markers, small tools, whatever!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Three tubes, zero clutter. Open-top pen holders for the RJC Wall Organizer System — pens, markers, small tools, whatever lives on your desk and shouldn't. Printed and fit-tested in both orientations so you don't have to.
Three square tubes (28mm outer, 23mm inner, 70mm tall) on a 91×100mm plate — deep enough for full-size markers, narrow enough to pair with the mail holder on the same band. The plate is tall enough to cover the mount slot completely, with the RJC badge moved up where it belongs.
Left and right — what's the difference? Only the hidden post placement. The front geometry is identical on both. The 48mm slot grid means a 91mm accessory can't just center its posts and sit anywhere — so there are two variants: posts shifted for mail-on-the-right or mail-on-the-left. Buy the pair, use whichever matches your layout. Recommended pairing: mail holder on the right, pen holder (left variant) on the left — verified fit with a 5mm gap and clean margins.
Specs:
Plate: 91×100mm, 34mm total depth
3× square tubes: 28mm outer / 23mm inner / 70mm tall
2× v4.3 mount posts per holder (side-specific placement)
Left variant: posts at −14.5/+33.5; Right variant: posts at −33.5/+14.5
Compatibility: mounts to any RJC Wall Organizer band (see the Bands & Mounting Kit listing). Designed to share a band with the mail holder. Part of the RJC Wall Organizer System.
***Left & Right are designed to be with Mail Holder. Centered Posts was designed to be paired with ANY other (2 Post) accessory.***
More accessories coming. The lineup keeps growing — your bands are future-proof.
Printing suggestions
Orientation: pre-oriented, print as-is (plate flat on the bed, tubes growing up).
Supports: Tree (Auto) - For Mounting Posts
Brim: recommended — tall thin tubes on a small footprint; a brim keeps things planted.
Layer height: 0.2mm for clean tube walls.
Walls/infill: 3 walls, 15% infill.
Material
PETG recommended, PLA works fine.