Spooky All-Season Modular Lantern – Interchangeable Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable modular lantern with swappable seasonal panels. For LED tea lights.
- Ocena
- 4 / 5
- Polubienia
- 76
- Pobrania
- 158
- Wydruki
- 2
- Wyświetlenia
- 620
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring cozy ambiance to your home all year round with this fully customizable 3D-printed lantern! Designed around interchangeable side panels, this lantern easily adapts to any season or occasion—whether it’s Halloween, Christmas, Easter, Spring, Summer, or Autumn.
You can print the included themed panels or easily design and print your own custom variations! For the best visual effect, print the panels in a high-contrast color relative to the main lantern body.
Key Features & Assembly:
Tool-free Panel Swapping: The panels slide smoothly into internal side slots from the top.
Twist-Lock Top Lid: The top lid slides on and locks securely into place with a slight twist.
Compact Dimensions:
Overall Lantern Size: ~145 mm (Height) x ~90 mm (Width)
Panel Dimensions: 79 x 39 x 1 mm
Key Advantages (Highlights):
🎃 Year-Round Usability: One lantern base for all holidays and seasons.
🛠 Easy & Fast Assembly: Twist-lock mechanism with no screws or glue required.
🖨 Optimized for 3D Printing: Designed specifically to minimize necessary supports.
🎨 Infinite Customization: Create your own lithophane or patterned 79x39x1 mm panels.
Print & Slicing Settings:
Top Lid: Needs supports (on print bed / build plate only).
Lantern Body & Panels: No supports required!
Infill: 15–20% (Grid or Gyroid recommended).
Top Lid Infill: You can use Lightning infill for the top lid to save both print time and material; while this reduces overall strength, it remains completely sufficient for decorative use. Alternatively, use Gyroid for better durability and strength.
Layer Height: 0.16 mm or 0.20 mm (lower layer heights give crisper contrast details on panels).
Alternatively, you can slice a 1,5 cm slice off the top lid along the Z-axis, flip it, print it upside down, and print it completely without supports. This gives you a flat top for your lantern (see pictures).
⚠ IMPORTANT SAFETY WARNING:
FOR LED TEA LIGHTS ONLY! Do NOT use real candles or open flames inside this lantern. The plastic (PLA/PETG) will melt and poses a serious fire hazard. Always use battery-operated LED candles!