1 / 1
Fiat 850 20mm rear lift - TPU 72D
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supplement to lift the rear of the car.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits on top of the springs original metal/rubber top end (might need to compress the original spring in the process) 1 per spring, just on the top of side
Ride car a few blocks after installation to let it set to final height.
Print on TPU72D, 40% infill, gyroid, 4-5 walls