MakerKnife 3D Printed Top Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on customizing the @giacowhatever MakerKnife. As I do a lot of 3D printing it was clear to me that I…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on customizing the @giacowhatever MakerKnife.
As I do a lot of 3D printing it was clear to me that I would end up customizing my MakerKnife using my 3D printer.
And that I did.
I took a scan of the top plate of the maker knife and imported it to Fusion360 (file is included if you want to customize it).
All I then had to do is correct the scan using measurements of the real thing, that I took with my calipers.
Then extrude and voilà :)
I printed this plate as a full but didn't like it.
Luckily there are a lot of fill patterns so I removed the top full layers and let the infill show.
That's all.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
20
Notes:
2 Base Layers
2 Outer Shells
Custom Infill
No Top Layer
Category: Hand Tools