Dovetailed Precision Gantry Passthrough for Advance Filtration (AF)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to avoid bending PTFE tubes with AF installed
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original version will work along with AF installed but it introduces a bend and longer PTFE length that could add unnecessary friction to feeding filament. In order to avoid this, I placed the pass through holes closer to either end while preserving the original screw holes.
The 3MF project files are included, and all changes done in Prusa Slicer. The hole size and angle should be very close to the original. The holes are 4.5mm in diameter at a 60 degree angle, 2 cm apart. The PTFE hole distances can be adjusted as needed.
Printed in PETG, 3 walls, 15% infill, 0.15 structural setting with supports. Print pieces on bed as oriented in the file.