1 / 2
Classic Pipe Holder compatible with Vuse Pro One (USB-C Charging Port, Side Slots) — zdjęcie 1
1 / 2

Classic Pipe Holder compatible with Vuse Pro One (USB-C Charging Port, Side Slots)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pipe-style holder compatible with Vuse Pro One. Slides in from the stem, charges via USB-C at the back.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

Pipe-style holder for the Vuse Pro One. Slide the Vuse in from the stem, with the last 15 mm of the mouthpiece sticking out. Charge it through the USB-C hole at the back, without taking it out.

Two versions, same inside: Standard (flared bowl, 113 × 53 mm) and Classic (rounded bowl with decorative rings, 110 × 55 mm).

Features: hollow bowl with a closed floor, snug tunnel (21.9 × 14.3 mm) with grip ribs, USB-C hole at the back, and LED and air slots on both sides, so it works either way up.

No access to the side button. The button is covered, so this works with puff activation only.

Print: PETG or PLA, bowl up on the flat underside, with supports.

Notes: the tunnel, ribs and USB-C hole were print-tested on a real Vuse Pro One. The LED and air slots are approximate, so tell me in the comments if they’re off. The Classic hasn’t been test-printed yet.

Not affiliated with Vuse, a trademark of its owner. For adults only. Follow your local laws.

Tagi